It's 7:40 on a Thursday morning. The produce and dairy order has just come off the truck, and two people are racing to get forty-odd cases into the walk-in before the breakfast rush. The door's wedged open with a milk crate. Cases go in wherever there's a gap, some of them stacked right up against the fan at the back. Twenty minutes later the door finally shuts, everyone goes back to the line, and the milk crate goes back under the bench.
At 6 a.m., before any of that happened, someone wrote the cool room temperature on the sheet taped to the door. It was right where it should be. And that's the number that will sit on the log for the rest of the morning.
This post is about one habit: taking a second reading on your fridges and cool rooms after a delivery has been put away, not just at opening, and doing something useful with it when it's out.
Why the opening reading misses the busiest part of the day
A reading first thing in the morning tells you the unit held overnight. That's worth knowing. But the unit has a much harder time in the hour after a delivery than it does at 3 a.m. with the door shut:
- The door is open far longer than in normal service, often propped so people can move cases quickly.
- Product arrives a bit warmer than the room, and a lot of it arrives at once.
- Cases get packed tight or stacked in front of the fan, so cold air can't get round them.
- The person putting the order away is thinking about getting back to the line, not about the thermometer.
None of this means something has gone wrong. Most of the time the room pulls back down without any fuss. The point of the second reading is to know that it did, rather than assume it.
When to take the second reading
Give the unit a little time after the door shuts. A reading taken while the door's still open tells you nothing you didn't already know. Many kitchens settle on something simple, like "first quiet moment after the order is away", or a fixed time that usually lands after the delivery window, such as 10 a.m. on delivery days. Pick one, put it in your food safety plan, and keep it the same, so a reading that's out of line actually stands out.
What goes on the log
Our Kitchen Fridge Temperature Log template is short on purpose. Here's how each field earns its place on a delivery day.
Check date and Check time. The time is what turns this from "Thursday's reading" into "the reading after Thursday's delivery". Two entries for the same cool room on the same morning, one at 6:05 and one at 10:10, tell the whole story.
Unit / fridge ID. Use whatever the kitchen actually calls it: "Walk-in 1", "Bar fridge", "Pastry freezer". If you've got two walk-ins and only one gets the deliveries, make sure the names make it obvious which is which.
Unit type. The options are Fridge, Freezer, Cool room and Display cabinet. It lets you filter later, so you can look at just the cool rooms.
Temperature reading (°C). The number itself. Write what the thermometer says, not what you think it should say. A reading of 6.5 that you write down is far more useful than a 4 that you rounded to make the log look tidy.
Within acceptable range? Yes, or No — action required. Your range comes from your own food safety plan and the rules where you operate, so it's worth printing that range on a sticker by the door so nobody has to remember it.
Corrective action taken. This is the field that matters most when the answer is no, and it's the one that's easiest to leave blank.
Checker name and Checker signature. The person who took the reading, signed with a finger on the screen.
When the reading is out
A high reading straight after a delivery isn't a reason to panic, but it is a reason to act and to write down what you did. In plain terms, the corrective action box should answer three questions: what did you change, when are you checking again, and what happened to the food?
Some of the things people write in there on a delivery day:
- "Door had been propped for 20 min during delivery. Moved cases off the fan, door shut. Rechecking in 30 min."
- "Second reading back in range at 10:45. Product not affected."
- "Still high on recheck. Moved dairy and cooked items to Walk-in 2, told the head chef, called the service company."
That recheck matters. If the first reading was out, do another check later and log it as its own entry, with its own time. That way the record shows the problem and the fix, not just the problem.
What you do with the food itself depends on your own food safety plan and your local rules, which is another reason to have those written down before the bad day comes rather than after.
Making it easy on a busy morning
The reason the second reading gets skipped is the same reason most kitchen checks get skipped. Everyone's busy, and the sheet is somewhere else. A few things help:
- Put the fill link where the reading happens. A QR code on the walk-in door, next to the display, means the check is one scan away. Some kitchens print one code per unit.
- Tie it to the delivery, not the clock. Whoever signs for the order owns the second reading. That's easy to agree at a pre-service briefing and easy to remember.
- Use the phone already in their pocket. The template's required fields mean nobody can send a check without a unit, a reading and a yes or no. People who only fill the form don't need an account, just the link.
What the record shows you over a few weeks
Every reading lands in Reports, so a head chef or site manager can see at a glance which units were checked, when, and which ones were out.
The patterns are where it pays off. If Walk-in 1 is fine at 6 a.m. every day but keeps coming up high after Thursday's delivery, that's worth looking at: maybe the Thursday order is the big one, maybe it arrives at the worst time, maybe the room just doesn't have the capacity for that much warm product at once. You'd never see that on a sheet that only ever has the opening number on it.
And when an inspector, a client or your own management asks how you keep on top of cold storage, you can export the log from Reports as PDF or CSV and show the readings, the times, who took them and what they did when something was off.
You'll find related templates on the Healthcare & hospitality page, including the Food Safety Temperature Check for hot-hold and cook temperatures, which covers the other end of the kitchen.
If you'd like to try it, start a free trial, load the Kitchen Fridge Temperature Log from Templates in the builder, and put a fill link on the walk-in door for a couple of delivery days. See what the second reading turns up.