Truck crane / lifting pre-start

Truck-mounted Crane Pre-start Checklist Form Template

A pre-start for truck-mounted and knuckle-boom cranes: outriggers and pads, hydraulic hoses, boom and slew, hook and latch, controls and emergency stop, load chart and limit devices — plus the truck itself and the lifting gear on board.

In the builder, open Templates and load this form to get started.

For Logistics & transport · Driver daily inspection pack

Why this online form template matters

Truck-mounted cranes go from road vehicle to lifting machine several times a day. The pre-start has to cover both: the truck that gets it to site, and the crane, outriggers and lifting gear that carry the load. Missing one outrigger pin or a weeping hose matters far more here than on an ordinary truck.

FormSafely’s truck-mounted crane pre-start form template records the operator, truck or crane number, odometer and site, then checks the crane (outriggers, pads and locking pins; hydraulic hoses and fittings; boom, slew and extensions; hook, safety latch and rope or chain; controls and emergency stop; load chart and capacity sign; overload and limit devices) and the truck (tyres, lights and beacon, fluid leaks). A tick list confirms tagged slings, shackles and tag lines are on board.

Each item is OK, Minor defect or Major — out of service. A defect asks what is wrong and offers a photo, and the form ends with a crane safe-to-use or tag-out decision and the operator’s signature.

It opens in Driver mode so operators get big buttons on a phone or tablet and a one-tap “Mark remaining checks OK” after flagging anything wrong.

Reports badge every submission with a defect, and PDF export gives you a clean record for the principal contractor or an inspector. This template supports your crane’s inspection regime; it does not replace periodic inspections by a competent person.

Sign up or sign in, open Templates, load Truck-mounted Crane Pre-start, add checks from your crane manufacturer’s manual, and share the fill link with your operators.

What this FormSafely template covers

Fields aligned with the ready-made template in the FormSafely builder (you can customise after loading).

  • Date and operator name (required)
  • Truck / crane number (required), odometer (numbers only) and site / job
  • Crane: outriggers, pads and locking pins; hydraulic hoses and fittings; boom, slew and extensions; hook, safety latch and rope / chain; controls and emergency stop; load chart and capacity sign; overload / limit devices tested
  • Truck: tyres and wheels, lights and beacon, fluid leaks
  • Lifting gear on board: tagged slings, shackles, tag lines
  • Each check: OK / Minor defect / Major — out of service, with a defect note and optional photo
  • Crane safe to use? Yes / No — tag out
  • Other notes and operator signature

Questions about this template

Is this a replacement for a crane’s periodic inspection?

No. It is the operator’s daily pre-start. Keep your periodic and annual inspections by a competent person; the pre-start gives you a signed daily record in between.

Can I add checks from the manufacturer’s manual?

Yes. Add an Inspection field from the Fields list for each extra check. It gets the same OK / minor / major buttons and defect prompt.

Where do I see cranes with defects?

In Reports. Submissions with a defect show a red “out of service” or amber “minor defect” badge, and the defective items are listed first.

Does it work on a tablet in the cab?

Yes. The form works in any modern phone or tablet browser, and Driver mode makes the buttons large enough to use with gloves.

Ready to digitise this form?

Sign up or sign in, open Templates in the builder, load this template, and share a fill link. Export submissions as PDF or CSV from Reports when you need records.